Product ID:QUICK DRY SPRAY ENAMEL-CLEAR, PROD CODE:55-A, PN:55-5
MSDS Date:05/15/1992
FSC:8010
NIIN:00F004517
MSDS Number: BTJCT

PPG INDUSTRIES INC

1 PPG PL
PITTSBURGH, PA 15272
US

Emergency Phone: 304-343-1300

Info Phone: 800-441-9685

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 10-15%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 35-40%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

NAPHTHA, MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 5-10%

ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 10-15%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 10-15%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9394

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 20-25%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL;9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS, RESINS (ROSIN), & ADDITIVES (PROPRIETARY)

Fraction By Weight: 5-10%

LD50 LC50 Mixture:NOT GIVEN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL OR FATAL. EYE:IRRIT.
SKIN:MODERATE IRRIT. INHAL:HARMFUL. VAPORS IRRIT NOSE/EYE/THROAT.
REPEATED EXPOSURE TO HI VAPOR CONCEN:IRRIT OF RESP SYS & PERMANENT
BRAIN & NERVOUS SY DAMAGE. INTE NTIONAL MISUSE BY DELIBERATELY
CONCEN &INHAL THE CONTENTS CAN BE HARMFUL/FATAL.
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS &
LOSS OF COORDINATION ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO
HIGH. REDNESS, ITCHING, BURNING SENSATION & VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, & SWELLING ARE CONDITINS ASSOCIATED W/EXCESSIVE
SKIN CONTACT.

First Aid:INGEST:DON'T INDUCE VOMIT.EYE:FLUSH IMMED W/LOTS OF H2O FOR @
LEAST 15MINS.SKIN:FLUSH IMMED W/LOTS OF H2O FOLLOWED BY WATERLESS
HAND CLEANER&SOAP&H2O IF MATL APPEARS TO ADHERE TO
SKIN.INHAL:REMOVE TO FRESH AIR.APPLY ARTI RESP&OTHER SUPPORTIVE
MEASURES AS REQUIRED.OTHER:IF INGEST,ANY TYPE OF
OVEREXPOSURE/SYMPTOMS OF OVEREXPOSURE OCCUR DURING/FOLLOWING USE OF
MATL CONTACT POISON CTRL CTR/EMERG RM/DR

Flash Point Method:PMCC
Flash Point:15.0F,-9.4C
Lower Limits:2.4
Extinguishing Media:USE NFPA CLS 8 EXTINGUISHERS(CO2,DRY CHEM,UNIVERSAL
AQUESOUS FILM FORMING FORM)DESIGNED TO EXTINGUISH CLS1A FLAM LIQ
FIR
Fire Fighting Procedures:H2O SPRAY(FOG NOZ)MAY BE INEFFECTVIE BUT CAN
USE TO COOL CLSD CONTAINERS (PREVENTS PRESSURE BUILDUP&POSS
AUTOIGNITION/EXPLOSION WHEN EXPOSED TO EXT HEAT). SCBA
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT SURFACES. AEROSOL
CONTAINERS HOLD EXTREMELY FLAM GAS & FLAM LIQ UNDER PRESSURE.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION.ONLY PERSONNEL
EQUIPPED W/PROPER RESP & SKIN & EYE PROTECTION SHOULD BE PERMITTED
IN AREA.REMOVE ALL SOURCES IGNITION.TAKE UP SPILLED MATL
W/SAWDUST,VERMICULITE OR OTHER AB SORBENT MATL & PLACE INTO
CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NOT GIVEN.

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED. DO NOT
STORE >120F. STORE LG QUANTITIES IN BUILDINGS DESIGNED & RPOTECTED
FOR STORAGE OF NFPA CLASS 1A FLAM LIQUIDS.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
COATING SYSTEM. READ THE MATL SAFETY DATA SHEET(S) FOR THE OTHER
COMPONENT OR COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE
MAY HAVE THE HAZARDS OF ALL OF ITS PARTS.

Respiratory Protection:OVEREXPOSURE TO VAPORS MAY BE PREVENTED BY
ENSURING VENTILATION CTRLS,VAPOR EXHAUST/FRESH AIR ENTRY,NIOSH/MSHA
APPROVED(TC23C)AIR PURIFY/AIR SUPP(RC19C)RESP MAY ALSO REDUCE
EXPOSURE.READ RESP MFG INST RUCT/LITERATURE TO DETERMINE TYP,ETC.
Ventilation:GEN DIL/LOCAL EXHAUST VENT IN VOL&PATTERN TO KEEP CONCEN OF
INGRED BELOW LOWEST SUGGEST EXPOSURE LIMITS,LEL & DECOMPOSIT
Protective Gloves:NEOPRENE, NITRILE RUBBER, LATEX RUBBER.
Eye Protection:CHEM-TYP SPALSH GOGGLES,FULL FACE SHIELD
Other Protective Equipment:PROTECTIVE CLOTHING INCLUDING IMPERMEABLE
APRON. CLEAN OR DISCARD CONTAMINATED CLOTHING AND SHOES.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health

HCC:V3
Boiling Pt:B.P. Text:-69F,-56C
Vapor Pres:<86
Vapor Density:>AIR
Spec Gravity:7
Evaporation Rate & Reference:<52
Solubility in Water:APPRECIABLE
Appearance and Odor:PRESSURIZED CAN CONTAINING PAINT&PROPELLANTS W/ODOR
CHARACTERISTICS OF SOLVENTS
Percent Volatiles by Volume:93-94

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL, ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
FLAMES. DO NOT APPLY TO HOT SURFACES.
Hazardous Decomposition Products:HAZARDOUS DECOMPOSITION PRODUCTS.
FUMES INCLUDING CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF IA ACCORDANCE
W/FED/STATE/PROVINCIAL/LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMTPY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMENT FAC ILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.